Partie 1: Impression lithographique offset sur feuilles et à bobines. STANDARD. ISO. Third edition. Reference number. ISO (E). ISO is an international standard used to determine color and transparency conformance of four- color lithographic printing inks. determining if “High Tack Bengal Process Series” inks conformed to ISO ISO – was performed using an IGT Printability Tester. The four inks were.
|Published (Last):||4 January 2010|
|PDF File Size:||20.65 Mb|
|ePub File Size:||6.54 Mb|
|Price:||Free* [*Free Regsitration Required]|
ISO Conformance Tested Ink & Suppliers | Printing Industries of America
The revision for offset printing is complete with the present standard ISO For multi-colour printing the inks are mixed by printing primary colours over or next to each other in solid and screen areas. However as actual application is affected by many factors over which we have no control, we are not liable for printing failures. The colours cyan, magenta and yellow also correspond to this standard.
In order to achieve better fastness properties, for example alkali or light fastness, a group of experts from the CEPE European Council of producers and importers of paints, printing inks and artists colours recommended the standardization of a new ink series, in Input values and average ISO isp for cyan transparency. The colour values determined in the standard are a further approach to standardise offset printing.
In general, the number of primary colours is optional; for economic reasons, however, not too many primary colours should be used. For the evaluation of the transparency, several printing samples with graduating ink film thicknesses are to be printed on is substrate.
As process printing inks have to show sufficient transparency for the functioning of multi colour printing, corresponding values have been stipulated in ISOwhich may not be undercut.
Europe For Europe, the average values of more than kso current process inks from different producers were generated. In case a printing ink is not totally transparent, the light that touches the print sample during observation or colour measurement is increasingly scattered according to higher ink film thickness. In process inks were standardized for the first time in Germany with DIN 16 for letterpress and 284-61 16 for offset printing.
The four-colour system has established itself in the main printing procedures, however.
In complete accordance with the European colour scale, the international standard ISO was published in There are some colour systems on the market which work with up to seven colours in order to display the widest possible colour space. According to our measurements, the most common ink series, especially ours, are at least very close to the nominal value and mostly within the given tolerances. At complete transparency sometimes to be found with cyana horizontal line shows.
In practice, however, this means that when launching colour management, the already used ink series in the print shop should serve as reference considering the commonly used full tone densities in the print shop.
That means that the difference between printed and blank black increases.
It is based on and conforms to our current knowledge. If the colour distance between printed and blank black is put down as function of the ink film thickness, a line arises whose inclination is low at a high transparency of the printing 246-1 and higher if the transparency is lower. For Europe, the average values of more than 60 current process inks from different producers were generated.
Input values and average ISO value for yellow. Information on standard ISO For multi-colour printing the inks are mixed by printing primary colours over or next to each other in solid and screen areas.
It was very difficult to define 2846-11 colorimetric nominal values which are to be the future chromaticity coordinates of the standardized printing inks, as values had to be found that were acceptable to all experts from the various economic areas. Transparency As process printing inks have to show sufficient transparency for the functioning of multi colour printing, corresponding values have been stipulated in ISOwhich may not be undercut.
The inclination is then 0. These series are produced by us with utmost care and are delivered with the lowest colour metric fluctuations.
ISO Epple Druckfarben AG
Print products should be produced and also reproduced, again and again, all over the world, with the same results. Examination of transparency For the evaluation of the transparency, jso printing samples with graduating ink film thicknesses are to be printed on black substrate.
Input values and average ISO value for magenta. Compliance with the standard is given if the measured values do not exceed the stipulated value of transparency.
ISO 2846 Conformance Tested Ink & Suppliers
This technical instruction sheet is designed for your information and reference. This also applies as the standard for sheet-fed offset. Colour values for black were also included in the new standard. Colour values It was very difficult to define the colorimetric nominal values which are to be the future chromaticity coordinates of the standardized printing inks, as values had to be found that were 2846–1 to all experts from the various economic areas.
This colour definition was stipulated in io DIN 16 The usage of defined process printing inks with fixed properties in terms of colour is one of the most important preconditions to achieve reproducible print results.
The reciprocal value of the inclination of the line of best fit by the measuring points, describes the extent of transparency. Measurement geometry Standard illuminant: The term for this new series was European colour scale or sometimes shortened to European scale.